Fire protection
Bioprotection
Anti-corozion undercoat
Waterproofing
Thermal insulation
Fire extinguishing powder
Fire-retardant treatment


Fite- and bio- protective varnish

Кнопка быстрый подбор англ.jpg

 

FIRE-AND BIO-PROTECTIVE VARNISH FOR WOOD AND WOODEN MATERIALS «OBEREG VARNISH (BSP)»

FIRE-AND BIO-PROTECTIVE VARNISH FOR WOOD AND WOODEN MATERIALS «OBEREG VARNISH (BSP)»
Minimum quantity: 10 kg

Price per kg: 340 RUB


Qty(kg):

ВКонтакт Facebook Google Plus Одноклассники Twitter Livejournal Liveinternet Mail.Ru


FIRE-AND BIO-PROTECTIVE VARNISH FOR WOOD AND WOODEN MATERIALS «OBEREG VARNISH (BSP)»


ТU 2311-004-73958298-2006

NSOPB.RU.PR.010/2.Н.00051

C-RU.PB47.В.00256

SGR BY.20.21.01.008.E.001004.06.15

 

«ОBEREG VARNISH (BSP)»  - is a single-component, organic based  varnish, ready to use.           

The varnish is intended:

-     for fire protection of articles and end panels made of wood and wooden materials (veneer, fiberboard, chipboard, MDF,  incl. laminated chipboard, LMDF, laminated fiberboard )

-     for bio-protection of varnished surfaces from decay, timber destroying, painting  and mold fungi.

It provides

- the 1st group of fire-proof efficiency according to Russian State Standard GOST R 53292-2009.

-  G1 flammability group according to GOST 30244-94

- V2 inflammation group according to GOST 30402-96

- smoke-developed index D2 according to GOST 12.044.1-89, п.4.18

- combustion products toxicity equivalent Т2 according to GOST 12.044.1-89, п.4.20

- flame spread group RP1 according to GOST R 51032-97

- fire hazard class КМ2

THE VARNISH (BSP) IS NEITHER WEAR-RESISTANT NOR INTENDED FOR PROCESSING OF FLOORS.

 

PHYSICAL, CHEMICAL AND MAINTENANCE PROPERTIES

Appearance

Homogenous fluid of milk color

Appearance of the coat

Homogenous semi-gloss transparent coat, colorless or light amber yellow shaped. It stresses the texture of processed surface.

Density, g/cm3

0,94±0,05  at +20ºС

Viscosity according to viscometer at +20ºС, sec.

38

Adhesion to wood, point

1

Thinner, not more than 5% of the mass

Solvent

Packing

5 l, 10 l Polyethylene canisters

Net weight, kg

5,0 and 10,0 kg

Service life :

- on internal and hidden surfaces, not less than, … years.

- on external surfaces, under shelter not less than… years

 

                                              10

   7

Period of storage in intact packing, not more than … months

 

12

 

SPECIFICATION                                                   

Varnish consumption, g/m2

Varnish consumption, g/m2

Number of layers

   Processing wooden constructions and wooden materials (fiberboard, chipboard, MDF, VENEER, incl. laminated chipboard, LMDF, laminated fiberboard) to provide

1st group of fire-proof efficiency according to GOST R 53292-2009

250

 

 

2-3

   Processing wooden constructions and wooden materials (fiberboard, chipboard, MDF, VENEER, except of laminated chipboard, LMDF, laminated fiberboard) to provide indexes of fire hazard of processed materials  G1, V1, RP1, D2, Т2 (fire hazard class КМ2)

250

 

 

2-3

Drying time of the first layer, hours  (at +20ºС)

1

 

Achievement time of complete physical and mechanical properties of the cover, hours  (at +20ºС)

72

Time for achievement of complete fire-protection grade, days  (at +20ºС)

15-20

The varnish consumption is specified without consideration of technological losses.

Technological losses of the varnish while covering are in the range from 5% up to 15% and depend on the method of varnishing, parameters of processed construction and working conditions.

 

SURFACE PREPARATION

The varnished surface shall be dry and clean.

Before varnishing pine wood constructions, chipboard, laminated chipboard, LMDF, laminated fiberboard it is necessary to degrease the surface additionally with acetone with consistence of 50-100 g of acetone per 1m2 and let it dry.

 

Before varnishing it is necessary to make a check painting of a small area of the material and let the varnish dry, to make sure that the varnish has a good adhesiveness to this specific surface.

 

FIRE-PROTECTIVE VARNISHING

The fire-protective varnish «OBEREG VARNISH (BSP)» is supplied ready to use.

Mix the varnish thoroughly before use. Add solvent if necessary.

Fire-protective varnishing is carried out on the prepared surfaces according to these directions for use. The working temperature shall be not below -20ºС, relative air humidity shall be not more than 80%.

During work with varnish it is necessary to avoid ingress of water, because it leads to the formation of turbid white inclusions. The tools for varnishing shall be clean and dry.

The varnishing is carried out by means of airless spraying, with brush or paint roller in 2-4 layers to achieve the requisite consumption. If the varnish is airless sprayed, it can be diluted by solvent.                                                                                                                                                                            

For airless spraying of varnish it is advisable to use the equipment with following parameters:

Parameters

Values

Working pressure at least, … atmospheres

5

Nozzle diameter, mm

0,42-1,60

Spraying angle, degrees

20-40

Delivery hose diameter, mm

10

Delivery hose length, m

Max 60

 

It is advisable to keep the brush or roller in the solvent in pauses between varnishing due to fast polymerization of the compound to avoid drying. After works, the sprayer shall be cleaned with solvent or acetone.

 

The drying between layers at various varnishing methods shall be at least 1 hour (for laminated surfaces – at least 2 hours) at +20ºС and relative air humidity not more than 80%. Before the last layer it is necessary to make sure that the varnish on the surface has been dried up to the detachment. The varnishing with brush or roller increases the drying time by 20-25%. The drying time also increases at lower temperatures and higher air humidity.


FIRE-AND BIO-PROTECTIVE VARNISH FOR WOOD AND WOODEN MATERIALS «OBEREG VARNISH (BSP)»


Чтобы увидеть данную информацию пожалуйста авторизуйтесь.


Чтобы увидеть данную информацию пожалуйста авторизуйтесь.




January 30 in the Leninsky district of Novosibirsk caught fire one of the apartments on the second floor of the five-story building. Residents were evacuated from the house. To the house called the fire Department.
Read more

For several years, visitors complain about the unsatisfactory condition of the Kuibyshev Central district hospital. The building has not known normal repair for a long time. The walls of the building inside and outside are covered with cracks, in many corners lives abundant mold.
Read more
subscribe to news and articles

One of the most important aspects of our homes is the safety factor. Okay, we all love the idea of living in a beautiful house or apartment complete with awesome interior furnishings but the bottom line is always the same; how safe is your home? With this sobering thought in mind, let’s look at an extremely unobtrusive way to ensure that you and your loved ones are looked after should the unthinkable happen. Yes, we are talking about flame retardant exterior paint!
Read more

The very thought of fire grips the mind with fear and panic. Overwhelming heat, suffocating smoke, loss of property, and above all else, the loss of life. The insurance company may be able to replace the material goods, but there are some things that money simply cannot replace – lives, lost time and items of sentimental value.Fire strikes when least expected. It can start just about anywhere without warning, taking one by surprise and causing panic.    
Read more